| · Portal |
Help
Search
Members
Calendar
|
| Welcome Guest ( Log In | Register ) | Resend Validation Email |
![]() ![]() ![]() |
| sutzee |
Posted: May 11 2007, 11:00 PM
|
![]() Stock Group: VIP Member Posts: 117 Member No.: 679 Joined: 8-April 06 |
Ive fitted a HKS induction kit and found no problems with the way the car idles and runs etc.
Who else has one on there Altezza and have you done any other mod's to make this work? adjust fuel mix or anything? maybe you have a fuel controller |
| alimac |
Posted: May 11 2007, 11:26 PM
|
![]() Canterbury, NZ Group: Moderators Posts: 1,786 Member No.: 935 Joined: 15-September 06 |
I have a setup that Nosrab made which became redundant when he fitted his turbo. No issues at all, doesn't useany more fuel and makes a wonderful sound. Al I did was connect everything up and reset the ECU
-------------------- Yellow RS200z 6MT
|
| ar rai wa ! |
Posted: May 12 2007, 02:24 AM
|
|
Northshore, Auckland Group: Std. Member Posts: 283 Member No.: 719 Joined: 6-May 06 |
how much did u pay for this kit?
|
| Muzza |
Posted: May 12 2007, 04:18 PM
|
![]() Hamilton Group: Moderators Posts: 710 Member No.: 21 Joined: 6-August 04 |
I've got one was on the car when i got it. I've added a safc2 for tuning ability
-------------------- Muzza
HKS RS Induction. Tom's lightened flywheel,TRD Clutch,TRD Clutch Cover Apexi SAFCII,Gizzmo Shiftlight-Launch conntroller,Pivot speedmetre-x Cusco Front Strutbrace Mintex M116 Brakepads |
| blitzNUR |
Posted: May 12 2007, 05:28 PM
|
||
|
Lowered Group: VIP Member Posts: 289 Member No.: 1,507 Joined: 17-February 07 |
is this the HKS RS intake replacing the whole factory intake? feel any gains ? -------------------- Hi !!
|
||
| Greytezza |
Posted: May 12 2007, 06:16 PM
|
![]() Soccer Mom Group: Std. Member Posts: 24 Member No.: 2,192 Joined: 11-May 07 |
The induction system or high performance intake system like the one from HKS, Apexi, K&N..will be benefit only a turbo charge 6speed Alteza RS200..For the auto tranny RS200Z it is advisable to keep the stock intake system and just change the filter to a high flow K&N filter.
|
| sutzee |
Posted: May 14 2007, 05:31 AM
|
||
![]() Stock Group: VIP Member Posts: 117 Member No.: 679 Joined: 8-April 06 |
About Six hundred from Redline. And with the cold air box i had made from Performance Metalworks is seems a little more responsive and the aduction noise you get makes it all worth while. |
||
| greeneyes |
Posted: May 14 2007, 10:04 AM
|
||
![]() Targa Master Group: Admin Posts: 5,442 Member No.: 1 Joined: 3-August 04 |
Why is that Grey? There seem to be few KW gain in fitting one to the NA setups. -------------------- |
||
| andy |
Posted: May 15 2007, 04:28 PM
|
|
1 G - F E Group: Std. Member Posts: 425 Member No.: 783 Joined: 20-June 06 |
would these fit a is200 1g-fe?
-------------------- "My HKS sticker gives me 20kw atw"
|
| Greytezza |
Posted: May 15 2007, 09:16 PM
|
![]() Soccer Mom Group: Std. Member Posts: 24 Member No.: 2,192 Joined: 11-May 07 |
Greeneyes..Well there some of us in Malaysia that did change the stock intake with a performance intake system from HKS..etc..and the result was loss in low torque..and only gain loud noise.hehehe.
I have ask the tuner from Trial Tuning (J) about these problem and they have advise against the use of such air intake in a AT stock Altezza. The reason is that the ecu need to be retune to adjust to the high intake air flow and the stock ecu cannot be tune. It is only good if you have either installed a piggy back HKS Fcon IS or V pro and you can adjust yr A/F settings. But then again there will be not much significant gain in terms of WBHP. Those that have tried fixing these intakes have resorted to changing back to the stock intakes. I was even thinking of buying the K&N Tyhpoon air intake system that guanranteed increase of about 9BHP..as stated in their website. It works on some cars but not on all cars...hehehe |
![]() |
![]() ![]() ![]() |