Need Help, pod related
| · Portal |
 Help
 Search
 Members
 Calendar
|
| Welcome Guest ( Log In | Register ) | Resend Validation Email |
Altezza Club Of NZ/Australia->Altezzas - AS200 • AS300 • RS200 • Gita • IS200 • IS250 • IS300 • IS350 • IS-F->Engines • Intakes • Exhausts   |
Need Help, pod related| blitzNUR |
Posted: Mar 17 2007, 02:49 PM
|
|
Lowered  Group: VIP Member Posts: 289 Member No.: 1,507 Joined: 17-February 07  |
just decided i wanted a pod in my rs200 ... and ive readed all the forums on that its on good on the engine and it runs crap and all ...
so today i got a 90 degee bend and then onto a stright pipe and then pod. and seriously feels like crap ... and im soo piseed of cos i wasted that money for nothing. or if someone could direct me some how to fix this. cheers -------------------- Hi !!
 |
|
| Jase |
Posted: Mar 17 2007, 02:51 PM
|
 Auckland, NZ > Tsing Yi, HK Group: VIP Member Posts: 673 Member No.: 11 Joined: 5-August 04 |
Have you reset your ECU?
What pod filter? --------------------  |
|
| blitzNUR |
Posted: Mar 17 2007, 02:56 PM
|
|
Lowered Group: VIP Member Posts: 289 Member No.: 1,507 Joined: 17-February 07 |
ill post a photo in 3 mins
-------------------- Hi !!
|
|
|
| Muzza |
Posted: Mar 17 2007, 02:59 PM
|
 Hamilton Group: Moderators Posts: 710 Member No.: 21 Joined: 6-August 04 |
Where are you
-------------------- Muzza
HKS RS Induction. Tom's lightened flywheel,TRD Clutch,TRD Clutch Cover Apexi SAFCII,Gizzmo Shiftlight-Launch conntroller,Pivot speedmetre-x Cusco Front Strutbrace Mintex M116 Brakepads |
|
| blitzNUR |
Posted: Mar 17 2007, 03:00 PM
|
|
Lowered Group: VIP Member Posts: 289 Member No.: 1,507 Joined: 17-February 07 |
 im in auckland i might just pull the earth for 30 mins or so -------------------- Hi !!
|
|
|
| greeneyes |
Posted: Mar 17 2007, 03:12 PM
|
 Targa Master Group: Admin Posts: 5,442 Member No.: 1 Joined: 3-August 04 |
Swap the straight pipe to the other end of the curved pipe, so the MAF sensor is furthest from the filter and in a more linear airflow area.
Might help- -------------------- |
|
|
| jasestu |
Posted: Mar 17 2007, 05:45 PM
|
 caffeinated... Group: VIP Member Posts: 1,402 Member No.: 90 Joined: 20-September 04 |
And of course double check that the MAF is installed the right way round (sorry if that sounds patronising).
-------------------- |
|
|
| Noel |
Posted: Mar 17 2007, 10:05 PM
|
 Virtual visitor Group: Std. Member Posts: 321 Member No.: 657 Joined: 21-March 06 |
I think it's because of the small filter you have on the breather pipe..... i tried that but it barely ticked over, i think it needs a bit of vacuum to run right....
can you try and tap a pipe for it onto the main intake.... -------------------- From Ireland...
Drive an RS200Z tiptronic |
|
|
| blitzNUR |
Posted: Mar 18 2007, 07:43 AM
|
||
|
Lowered Group: VIP Member Posts: 289 Member No.: 1,507 Joined: 17-February 07 |
it runs ... just when i open the throttle the car takes about 3 - 4 secs to relise that i actually stepped on the gas ... but ill try what you said tonight noel cheers guys -------------------- Hi !!
|
||
|
|
| Twincams |
Posted: Mar 20 2007, 12:37 PM
|
 Stock Group: Std. Member Posts: 110 Member No.: 96 Joined: 27-September 04 |
usually when i am using the stock ecu with the open pod, i'll drive with very slow throttle angle changes throughout the whole rev range for the 1st week or so.... this will allow the ecu enough time to make any fuel and ignition timing adjustments on its own...
--------------------  |
|
|
| alexlegault |
Posted: May 1 2010, 07:03 PM
|
|
Soccer Mom Group: Std. Member Posts: 10 Member No.: 6,121 Joined: 30-March 10 |
http://z4.invisionfree.com/lexusaltezzaclu...showtopic=10310
my prob is kinda similar. i think you should punch a hole in the intake after the afm for that hose you have sticking out of the engine breathing to atmospheric preasre. alex. |
|
|
 |
|
